Datasheet4U Logo Datasheet4U.com

MC74HCT273A Datasheet Octal D Flip-flop

Manufacturer: onsemi

Overview: DATA SHEET .onsemi. Octal D Flip-Flop with mon Clock and Reset High−Performance Silicon−Gate CMOS MC74HC273A, MC74HCT273A The MC74HC273A/MC74HCT273A is identical in pinout to the LS273. The MC74HC273A inputs are patible with Standard CMOS outputs; with pull−up resistors, the device is patible with LSTTL outputs. The MC74HCT273A may be used as a level converter for interfacing TTL or NMOS outputs to high speed CMOS inputs. The HC273A/HCT273A consists of eight D flip−flops with mon Clock and Reset inputs. Each flip−flop is loaded with a low−to−high transition of the Clock input. Reset is asynchronous and active low.

Key Features

  • Output Drive Capability: 10 LSTTL Loads.
  • Outputs Directly Interface to CMOS, NMOS and TTL.
  • Operating Voltage Range: 2.0 to 6.0 V (HC), 4.5 to 5.5 V (HCT).
  • Low Input Current: 1.0 mA.
  • High Noise Immunity Characteristic of CMOS Devices.
  • In Compliance with the Requirements Defined by JEDEC Standard No. 7 A.
  • Chip Complexity: 284 FETs or 71 Equivalent Gates.
  • Q Suffix for Automotive and Other.

Similar Datasheet

Brand Logo Part Number Description Manufacturer
Motorola Logo MC74HCT273A Octal D Flip-Flop Motorola

More Datasheets from onsemi

Part Number Description
MC74HCT241A Octal 3-State Noninverting Buffer/Line Driver/Line Receiver
MC74HCT244A Octal 3-State Noninverting Buffer/Line Driver/Line Receiver
MC74HCT245A Octal 3-State Noninverting Bus Transceiver
MC74HCT259A 8-Bit Addressable Latch 1-of-8 Decoder
MC74HCT04A Hex Inverter
MC74HCT08A Quad 2-Input AND Gate
MC74HCT125A Quad 3-State Noninverting Buffer
MC74HCT132A Quad 2-Input NAND Gate
MC74HCT138A 1-of-8 Decoder/Demultiplexer
MC74HCT14A Hex Schmitt-Trigger Inverter

MC74HCT273A Distributor