MC74VHC1G135 Datasheet | onsemi

2-Input NAND Schmitt-Trigger with Open Drain Output The MC74VHC1G135 is a single gate CMOS Schmitt NAND trigger with an open drain output fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation. The internal circuit is posed of three stages, including a buffered 3- state output which provides high noise immunity and stable output. The input structures provide protection when voltages up to 5.5 V are applied, regardless of the supply voltage. This allows the device to be used to interface 5 V circuits to 3 V circuits. Some output structures also provide protection when VCC = 0 V and when the output voltage exceeds VCC. These input and output structures help prevent device destruction caused by supply voltage - input/output voltage mismatch, battery backup, hot insertion, etc. Features - Designed for 2.0 V to 5.5 V VCC Operation - 4.9 ns t PD at 5 V (typ) - Inputs/Outputs Over- Voltage Tolerant up to 5.5 V - IOFF Supports Partial Power Down Protection - Source/Sink 8 m A at 3.0 V - Available in SC- 88A, SC- 74A, TSOP- 5, SOT- 553, SOT- 953 and UDFN6 Packages - Chip plexity < 100 FETs - NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - These Devices are Pb- Free, Halogen Free/BFR Free and are Ro HS pliant & Figure 1. Logic Symbol DATA SHEET .onsemi. SC- 88A DF SUFFIX CASE 419A MARKING DIAGRAMS XX MG G 5 1 SC- 74A DBV SUFFIX CASE 318BQ XXX MG G TSOP- 5 DT SUFFIX CASE 483 SOT- 553 XV5 SUFFIX CASE 463B 5 XX MG G XX MG...