MDC3105 - Inductive Load Driver

onsemi

Key Features

s Low Input Drive Current and Good Back.
to.
Front Transient Isolation.
Internal Zener Eliminates Need for Free.
Wheeling Diode.
Internal Zener Clamp Routes Induced Current to Ground for Quieter System Operation.
Guaranteed Off State with No Input Connection.
Supports Large Systems with Minimal Off.
State Leakage.
ESD Resistant in Accordance with the Class 1C Human Body Model.
Low Sat Voltage Reduces System Current.

MDC3105 inductive load driver by onsemi - Datasheet Preview

Datasheet Details

Part number	MDC3105
Manufacturer	onsemi
File Size	299.50 KB
Description	Inductive Load Driver
Datasheet	MDC3105 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MDC3105LT1	RELAY/SOLENOID DRIVER SILICON MONOLITHIC CIRCUIT BLOCK	Motorola
MDC320-30io2	Thyristor/Diode Modules	IXYS
MDC320-32io2	Thyristor/Diode Modules	IXYS
MDC320-34io2	Thyristor/Diode Modules	IXYS
MDC320-36io2	Thyristor/Diode Modules	IXYS

Other Datasheets by onsemi

Part Number	Description
MDC5001T1	Low Voltage Bias Stabilizer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

DATA SHEET www.onsemi.com Integrated Relay, Inductive Load Driver Relay, Inductive Load Driver MDC3105 This device is intended to replace an array of three to six discrete components with an integrated SMT part. It is available in a SOT−23 package. It can be used to switch 3 to 6 Vdc inductive loads such as relays, solenoids, incandescent lamps, and small DC motors without the need of a free−wheeling diode. Features • Provides a Robust Driver Interface between DC Relay Coil and Sensitive Logic Circuits • Optimized to Switch Relays from a 3.0 V to 5.0 V Rail • Capable of Driving Relay Coils Rated up to 2.5 W at 5.