Datasheet4U Logo Datasheet4U.com

NBC12429 - Programmable PLL Synthesized Clock Generator

This page provides the datasheet information for the NBC12429, a member of the NBC12429A Programmable PLL Synthesized Clock Generator family.

Description

The NBC12429 and NBC12429A are general purpose, Phase Lock

Loop (PLL) based synthesized clock sources.

The VCO will operate over a frequency range of 200 MHz to 400 MHz.

output divider, where it can be configured to provide division ratios o

Features

  • Best.
  • in.
  • Class Output Jitter Performance, ±20 ps Peak.
  • to.
  • Peak.
  • 25 MHz to 400 MHz Programmable Differential PECL Outputs.
  • Fully Integrated Phase.
  • Lock.
  • Loop with Internal Loop Filter.
  • Parallel Interface for Programming Counter and Output Dividers During Powerup.
  • Minimal Frequency Overshoot.
  • Serial 3.
  • Wire Programming Interface.
  • Crystal Oscillator Interface.
  • Operating Range:.

📥 Download Datasheet

Datasheet preview – NBC12429

Datasheet Details

Part number NBC12429
Manufacturer ON Semiconductor
File Size 355.39 KB
Description Programmable PLL Synthesized Clock Generator
Datasheet download datasheet NBC12429 Datasheet
Additional preview pages of the NBC12429 datasheet.

📁 Similar Datasheet

Other Datasheets by ON Semiconductor
  • NBC12429A - Programmable PLL Synthesized Clock Generator
  • NBC12430 - Programmable PLL Synthesized Clock Generator
  • NBC12430A - Programmable PLL Synthesized Clock Generator
  • NBC12439 - Programmable PLL Synthesized Clock Generator
  • NBC12439A - Programmable PLL Synthesized Clock Generator

Full PDF Text Transcription

Click to expand full text
3.3 V/5 V Programmable PLL Synthesized Clock Generator 25 MHz to 400 MHz NBC12429, NBC12429A Description The NBC12429 and NBC12429A are general purpose, Phase−Lock−Loop (PLL) based synthesized clock sources. The VCO will operate over a frequency range of 200 MHz to 400 MHz. The VCO frequency is sent to the N−output divider, where it can be configured to provide division ratios of 1, 2, 4, or 8. The VCO and output frequency can be programmed using the parallel or serial interfaces to the configuration logic. Output frequency steps of 125 kHz, 250 kHz, 500 kHz, or 1.0 MHz can be achieved using a 16 MHz crystal, depending on the output dividers. The PLL loop filter is fully integrated and does not require any external components.
Published: |