NC7SZ10 Datasheet | onsemi

Tiny Logic UHS 3-Input NAND Gate Description The NC7SZ10 is a single 3- Input NAND Gate from onsemi’s Ultra High Speed Series of Tiny Logic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65 V to 5.5 V VCC operating range. The inputs and output are high impedance when VCC is 0 V. Inputs tolerate voltages up to 5.5 V independent of VCC operating voltage. Features - Space Saving SC88 6- Lead Package - Ultra Small Micro Pak™ Leadless Package - Ultra High Speed: t PD = 2.4 ns Typ into 50 p F at 5 V VCC - High Output Drive: ±24 m A at 3 V VCC - Broad VCC Operating Range: 1.65 V - 5.5 V - Power Down High Impedance Inputs / Output - Overvoltage Tolerant Inputs Facilitate 5 V to 3 V Translation - Patented Noise / EMI Reduction Circuitry Implemented - These Devices are Pb- Free, Halogen Free/BFR Free and are Ro HS pliant IEEC / IEC & Figure 1. Logic Symbol DATA SHEET .onsemi. MARKING DIAGRAMS SIP6 1.45x1.0 CASE 127EB Pin 1 E6KK XYZ 6 SC- 88 CASE 419B- 02 Z10M G G E6, Z10 KK XY Z M G = Specific Device Code = 2- Digit Lot Run Traceability Code = 2- Digit Date Code Format = Assembly Plant Code = Data Code- = Pb- Free Package (Note: Microdot may be in either location) - Date Code orientation and/or position may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 5 of this data...