NC7SZ175 Datasheet | onsemi

Tiny Logic UHS D-Type Flip-Flop with Asynchronous Clear Description The NC7SZ175 is a single positive edge- triggered D- type CMOS Flip- Flop with Asynchronous Clear from onsemi’s Ultra High Speed Series of Tiny Logic in the space saving SC70 6- lead package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65 V to 5.5 V VCC range. The inputs and output are high impedance when VCC is 0 V. Inputs tolerate voltages up to 5.5 V independent of VCC operating voltage. This single flip- flop will store the state of the D input that meets the setup and hold time requirements on the LOW- to- HIGH Clock (CP) transition. A LOW input to Clear sets the Q output to LOW level. The Clear input is independent of clock. Features - Space Saving SC- 88 6- Lead Package - Ultra Small Micro Pak™ Leadless Package - Ultra High Speed: t PD = 2.6 ns Typ into 50 p F at 5 V VCC - High Output Drive: ±24 m A at 3 V VCC - Broad VCC Operating Range: 1.65 V to 5.5 V - Matches the Performance of LCX when Operated at 3.3 V VCC - Power Down High Impedance Inputs / Output - Overvoltage Tolerant Inputs Facilitate 5 V to 3 V Translation - Proprietary Noise / EMI Reduction Circuitry Implemented - These Devices are Pb- Free, Halogen Free/BFR Free and are Ro HS pliant IEEC / IEC C CP Figure 1. Logic Symbol DATA SHEET .onsemi. MARKING DIAGRAMS SIP6 1.45x1.0 CASE 127EB C4KK XYZ Pin 1 C4, Z75 KK XY Z M G SC- 88 CASE 419B- 02 Z75MG G = Specific Device Code = 2- Digit Lot Run Traceability Code = 2- Digit Date Code Format = Assembly Plant Code = Date Code- = Pb- Free Package (Note: Microdot may be in either location) - Date Code orientation and/or position may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions...