NCD5703ADR2G Datasheet | onsemi

features include accurate Under- voltage- lockout (UVLO), desaturation protection (DESAT) and Active open- drain FAULT output. The drivers also feature an accurate 5.0 V output. The drivers are designed to acmodate a wide voltage range of bias supplies including unipolar and NCx5703B even bipolar voltages. Depending on the pin configuration the devices also include Active Miller Clamp (NCx5703A), separate high and low (VOH and VOL) driver outputs for system design convenience (NCx5703C) and Enable function for driver output control by external signal (NCx5703D). All four available pin configuration variants have 8- pin SOIC package. Features - High Current Output (+4/- 6 A) at IGBT Miller Plateau voltages - Low Output Impedance for Enhanced IGBT Driving - Short Propagation Delay with Accurate Matching - Direct Interface to Digital Isolator/Opto- coupler/Pulse Transformer for Isolated Drive, Logic patibility for Non- isolated Drive - DESAT Protection with Programmable Delay - Enable Input for Independent Driver Control (NCx5703D) - Tight UVLO Thresholds for Bias Flexibility - Wide Bias Voltage Range - NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - This Device is Pb- Free, Halogen- Free and Ro HS pliant NCx5703A Features - Active Miller Clamp to Prevent Spurious Gate Turn- on NCx5703B Features - Negative Output Voltage for Enhanced IGBT Driving NCx5703C Features - Separate Outputs for VOL and VOH NCx5703D Features - Enable Pin for Independent Driver Control Typical Applications - Solar Inverters - Motor Control - Uninterruptible Power Supplies (UPS) - Rapid Shutdown for Photovoltaic Systems SOIC- 8 D SUFFIX CASE 751 MARKING DIAGRAM NCD(V)5703X ALYW G NCD5703/NCV5703 = Specific Device Code = A, B, C or D = Assembly...