NCID9301 Datasheet | onsemi

Description The NCID9301 and NCID9311 are galvanically isolated high- speed 3- channel digital isolator with output enable. This device supports isolated munications thereby allowing digital signals to municate between systems without conducting ground loops or hazardous voltages. It utilizes onsemi’s patented galvanic off- chip capacitor isolation technology and optimized IC design to achieve high insulation and high noise immunity, characterized by high mon mode rejection and power supply rejection specifications. The thick ceramic substrate yields capacitors with ~25 times the thickness of thin film on- chip capacitors and coreless transformers. The result is a bination of the electrical performance benefits that digital isolators offer with the safety reliability of a >0.5 mm insulator barrier similar to what has historically been offered by optocouplers. The device is housed in a 16- pin wide body small outline package. Features - Off- Chip Capacitive Isolation to Achieve Reliable High Voltage Insulation  DTI (Distance Through Insulation):  0.5 mm  Maximum Working Insulation Voltage: 2000 Vpeak - Bi- directional munication - 100 k V/ms Minimum mon Mode Rejection - 8 mm Creepage and Clearance Distance to Achieve Reliable High Voltage Insulation - Specifications Guaranteed Over 2.5 V to 5.5 V Supply Voltage and - 40C to 125C Extended Temperature Range - Over Temperature Detection - Output Enable Function (Primary and Secondary side) - NCIV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable (Pending) - Safety and Regulatory Approvals  UL1577, 5000 VRMS for 1 Minute  DIN EN/IEC 60747- 17 (Pending) Typical Applications - Isolated PWM Control - Industrial Fieldbus munications - Microprocessor System Interface (SPI, I2C, etc.) - Programmable Logic Control - Isolated Data Acquisition System - Voltage Level Translator DATA SHEET .onsemi. SOIC16 W CASE 751EN MARKING DIAGRAM A WL Y WW...