NCN5151 - Wired M-BUS Slave Transceiver

onsemi

General Description

The NCN5151 is a single chip integrated slave transceiver for use in two wire Meter Bus (M

BUS) slave devices and repeaters.

Key Features

and adds two low power modes: a 2.
wire low power mode dedicated to System for meter Communication and Readout for powerless meters (SCR) and a 3.
wire low power mode allowing support for wireless.

📥 Download Datasheet

NCN5151 wired m-bus slave transceiver by onsemi - Datasheet Preview

Datasheet Details

Part number	NCN5151
Manufacturer	onsemi
File Size	177.97 KB
Description	Wired M-BUS Slave Transceiver
Datasheet	NCN5151 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NCN6001	Compact Smart Card Interface	onsemi
NCN6004A	Dual SAM/SIM Interface IC	onsemi
NCN6010	SIM Card Supply and Level Shifter	ON

Other Datasheets by onsemi

Part Number	Description
NCN5150	Wired M-BUS Slave Transceiver
NCN5110	Transceiver
NCN5120	Transceiver
NCN5121	Transceiver
NCN5130	Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

NCN5151 Wired M-BUS Slave Transceiver with Low Power Mode Support Description The NCN5151 is a single−chip integrated slave transceiver for use in two−wire Meter Bus (M−BUS) slave devices and repeaters. The NCN5151 reuses the NCN5150 features and adds two low power modes: a 2−wire low power mode dedicated to System for meter Communication and Readout for powerless meters (SCR) and a 3−wire low power mode allowing support for wireless applications. When configured in low power mode, the transceiver will not behave anymore as a constant current source in order to save energy. When configured and used in M−BUS mode, the NCN5151 transceiver provides all of the functions needed to satisfy the European Standards EN 13757−2 and EN 1434−3 describing the physical layer requirements for M−BUS.