Datasheet4U Logo Datasheet4U.com

NCP10970 - High-Voltage Switcher

Description

Pin No.

This pin is connected to the buck source/inductor junction and grounds the switcher circuitry.

The dissipated heat of the transistor is conducted out through this pin.

Features

  • Built.
  • in 670 V, 18 W RDS(on) Lateral MOSFET.
  • High.
  • voltage Start.
  • up Current Source.
  • Fixed.
  • frequency DCM Current.
  • mode Control Scheme.
  • End of Demagnetization Detection Ensures DCM Operation only.
  • Short.
  • circuit Protected Switcher Output with Auto.
  • recovery Function.
  • 4 ms Soft Start.
  • Internal Linear Regulator with Short.
  • circuit Protected Output.
  • Internal Comparator w.

📥 Download Datasheet

Datasheet preview – NCP10970

Datasheet Details

Part number NCP10970
Manufacturer ON Semiconductor
File Size 550.42 KB
Description High-Voltage Switcher
Datasheet download datasheet NCP10970 Datasheet
Additional preview pages of the NCP10970 datasheet.

📁 Similar Datasheet

  • NCP1030 - Integrated DC-DC Converter (ON)
  • NCP1031 - Integrated DC-DC Converter (ON)
  • NCP1086 - 1.5A Adjustable and 3.3V Fixed Output Linear Regulator (ON)
  • NCP1212 - Current Mode PWM Controller (ON)
  • NCP1215 - Low Cost Variable OFF Time Switched Mode Power Supply Controller (ON)
  • NCP1216 - PWM Current-Mode Controller (ON)
  • NCP1225 - Low Standby Power SMPS Controller (ON)
  • NCP1232 - Microprocessor Monitor (ON)
  • NCP1280 - Active Clamp Voltage Mode PWM Controller (ON)
  • NCP1410 - 250 mA Sync-Rect PFM Step-Up DC-DC Converter (ON)
Other Datasheets by ON Semiconductor
  • NCP1090 - Integrated IEEE 802.3af PoE-PD Interface Controller
  • NCP1091 - Integrated IEEE 802.3af PoE-PD Interface Controller
  • NCP1092 - Integrated IEEE 802.3af PoE-PD Interface Controller
  • NCP1093 - Integrated IEEE 802.3at PoE-PD Interface Controller
  • NCP1094 - Integrated IEEE 802.3at PoE-PD Interface Controller
  • NCP1095 - PoE-PD Interface Controller
  • NCP1096 - PoE-PD Interface Controller
  • NCP100 - Sub 1.0V Precision Adjustable Shunt Regulator

Full PDF Text Transcription

Click to expand full text
High-Voltage Switcher with Linearly Regulated Output NCP10970 The NCP10970 includes a high−voltage switcher, linear regulator and a dedicated comparator circuitry. The switcher is suitable for building output voltage up to 16 V (adjustable by resistor divider on FB pin) protected against short−circuit. Dedicated internal circuitry prevents continuous conduction mode (CCM) operation improves the surge robustness, efficiency and EMI. In no−load/light−load conditions, the part enters skip cycle operation and ensures low standby power consumption. A proprietary technique ensures high efficiency in the down−conversion process from output switcher voltage rail to raw sub voltage rail supplying a linear regulator.
Published: |