Datasheet4U Logo Datasheet4U.com

NCP1201 - PWM Current-Mode Controller

General Description

Pin No.

Key Features

  • efficient protection circuitry. When in the presence of a fault (e. g. failed optocoupler, overcurrent condition, etc. ) the control permanently disables the output pulses to avoid subsequent damage to the system. The IC only restarts when the user cycles the mains power supply. With the low power internal structure, operating at a fixed 60 or 100 kHz, the controller supplies itself from the high--voltage rail, avoiding the need of an auxiliary winding. This feature naturally eases the designer’s.

📥 Download Datasheet

Datasheet Details

Part number NCP1201
Manufacturer onsemi
File Size 401.59 KB
Description PWM Current-Mode Controller
Datasheet download datasheet NCP1201 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP1212 Current Mode PWM Controller ON
NCP1215 Low Cost Variable OFF Time Switched Mode Power Supply Controller ON
NCP1216 PWM Current-Mode Controller ON
NCP1225 Low Standby Power SMPS Controller ON
NCP1232 Microprocessor Monitor ON

Other Datasheets by onsemi

Part Number Description
NCP120 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCP1200 PWM Current-Mode Controller
NCP1200A PWM Current-Mode Controller
NCP1200CH PWM Controller
NCP1200D PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP1201 PWM Current- Mode Controller for Universal Off- Line Supplies Featuring Low Standby Power with Fault Protection Modes Housed in SOIC--8 or PDIP--8 package, the NCP1201 enhances the previous NCP1200 series by offering a reduced optocoupler current with additional Brownout Detection Protection (BOK). Similarly, the circuit allows the implementation of complete off--line AC--DC adapters, battery chargers or Switchmode Power Supplies (SMPS) where standby power is a key parameter. The NCP1201 features efficient protection circuitry. When in the presence of a fault (e.g. failed optocoupler, overcurrent condition, etc.) the control permanently disables the output pulses to avoid subsequent damage to the system. The IC only restarts when the user cycles the mains power supply.