Datasheet4U Logo Datasheet4U.com

NCP1338 Datasheet Pwm Controller

Manufacturer: onsemi

Overview: DATA SHEET .onsemi. PWM Current-Mode Controller for Free Running Quasi-Resonant Operation NCP1338 The NCP1338 bines a true current mode modulator and a demagnetization detector which ensures full Borderline/Critical Conduction Mode in any load/line conditions together with minimum drain voltage switching (Quasi−Resonant operation). The transformer core reset detection is done internally, without using any external signal, due to the Soxyless concept. The frequency is internally limited to 130 kHz, preventing the controller from operating above the 150 kHz CISPR−22 EMI starting limit. By monitoring the feedback pin activity, the controller enters skip mode as soon as the power demand falls below a predetermined level. As each restart is softened by an internal Soft−Skipt, and as the frequency cannot go below 25 kHz, no audible noise can be heard.

Key Features

  • an efficient protective circuitry which, in presence of an overcurrent condition, disables the output pulses and enters a safe burst mode, trying to restart. Once the default has gone, the device auto.
  • recovers. Also included is a bulk voltage monitoring function (known as brown.
  • out protection), an adjustable overpower compensation, and a VCC OVP. The fault timer is reset by any of these 3 conditions to ensure that the controller immediately restarts when the condition disappears.

More Datasheets from onsemi

Part Number Description
NCP133 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCP1336A Quasi-Resonant PWM Controller
NCP1336B Quasi-Resonant PWM Controller
NCP1337 PWM Current Mode Controller
NCP1339 QuasiResonant Controller
NCP130 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCP1308 PWM Current Mode Controller
NCP134 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCP1340 Controller Featuring Valley Lock-Out Switching
NCP1341 quasi-resonant flyback controller

NCP1338 Distributor