Datasheet4U Logo Datasheet4U.com

NCP1361 - Low Power Offline Constant Current PWM Controller

General Description

Pin out NCP1366 Pin out NCP1361 Name 1 6 Vs/ZCD 2 5 FB 3 4 CS 4 3 DRV 5 2 GND 6 1 VCC 7 NC 8 HV Function Connected to the auxiliary winding; this pin senses the voltage output for the primary regulation and detects the core reset event for the Quasi

Key Features

  • ±10% Current Regulation.
  • 560 V Startup Current Source.
  • No Frequency Clamp, 80 or 110 kHz Maximum Switching Frequency Options.
  • Quasi.
  • Resonant Operation with Valley Switching Operation.
  • Fixed Peak Current & Deep Frequency Foldback @ Light Load Operation.
  • External Constant Voltage Feedback Adjustment.
  • Cycle by Cycle Peak Current Limit.
  • Built.
  • In Soft.
  • Start.
  • Over & Under Output Voltage Protection.

📥 Download Datasheet

Datasheet Details

Part number NCP1361
Manufacturer onsemi
File Size 917.50 KB
Description Low Power Offline Constant Current PWM Controller
Datasheet download datasheet NCP1361 Datasheet

Other Datasheets by onsemi

Part Number Description
NCP13616 Low Power Offline Constant Current PWM Controller
NCP136 LDO Regulator
NCP1360 Low Power PWM Controller
NCP1362 Primary Side PWM Controller
NCP1365 Low Power PWM Controller
NCP130 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCP1308 PWM Current Mode Controller
NCP133 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCP1336A Quasi-Resonant PWM Controller
NCP1336B Quasi-Resonant PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Low Power Offline Constant Current PWM Current-Mode Controller with/without High Voltage Startup Current Source NCP1361, NCP1366 The NCP1361/66 offers a new solution targeting output power levels from a few watts up to 20 W in a universal−mains flyback application. Due to a novel method this new controller offers a primary−side constant current control, saving secondary−side components to perform current regulation. The NCP1361/66 operates in valley−lockout quasi−resonant peak current mode control mode at nominal load to provide high efficiency. When the secondary−side power starts diminishing, the switching frequency naturally increases until a voltage−controlled oscillator (VCO) takes the lead, synchronizing the MOSFET turn−on in a drain−source voltage valley.