NCP1568D - DC-DC Active Clamp Flyback PWM

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCP1568D
Manufacturer	ON Semiconductor
File Size	683.24 KB
Description	DC-DC Active Clamp Flyback PWM
Datasheet	NCP1568D Datasheet
Additional preview pages of the NCP1568D datasheet.

Product details

Description

HV FLT RT DTH FB CS 1 16 NCP1568D 4 13 5 12 6 11 7 10 8 9 SW ATH ADRV VCC LDRV GND Figure 2. Pinout Table 1. PIN FUNCTIONAL DESCRIPTION Pin Out Controller Option Name Function 1 HV Input to the HV startup circuit.A resistor can be placed in series with the HV pin to limit current in case of a short on the board.The recommended value for the resistor is 10 W.2,3,14,15 Removed for creepage and clearance compliance.

Features

a HV startup circuit, a strong low side driver, and a 5 V logic level driver for the active clamp FET. The NCP1568D is suitable for a variety of.

📁 Similar Datasheet

NCP1560 - Full Featured Voltage Mode PWM Controller (ON)
NCP1500 - Dual Mode PWM/Linear BUCK Converter (ON)
NCP1530 - 600mA PWM/PFM Step-Down Converter (ON)
NCP1550 - 600 kHz PWM/PFM Step-Down DC-DC Controller (ON)
NCP15WB333E03RC - Thermistors (Murata)
NCP15WB333J03RC - Thermistors (Murata)
NCP15WB333x03RC - NTC Thermistors (Murata)
NCP15WB473D03RC - Thermistors (Murata)

Other Datasheets by ON Semiconductor

NCP1568 - AC-DC Active Clamp Flyback PWM
NCP1562A - High Performance Active Clamp/Reset PWM Controller
NCP1562B - High Performance Active Clamp/Reset PWM Controller
NCP1565 - Highly Integrated Dual-Mode Active Clamp PWM Controller
NCP1566 - Dual-Mode Active Clamp PWM Controller
NCP1501 - Dual Mode PWM/Linear Buck Converter

Published: Nov 6, 2022 |