NCP2824 Datasheet PDF (Non-Clip and Power Limit Mono Class-D Amplifier)

NCP2824 - Non-Clip and Power Limit Mono Class-D Amplifier

Description

up to 2.4 W to a 4 W load with a 5 V supply voltage.

With the same battery voltage, it can deliver 1.2 W to an 8 W load with less than 1% THD+N.

clipping function automatically adjusts the output voltage in order to

Features

Non Clipping Function with Automatic Gain Control Circuitry.
Programmable Power Limit Function.
Single Wire Interface. No Need for Additional Components.
Max THD+N Configurable by Swire Interface.
Only One Capacitor Required.
Fully Differential Architecture: Better RF Immunity.
No Need for Input Capacitors in Fully Differential Configuration.
High Efficiency: up to 90%.
Low Quiescent Current: 2.2 mA Typ.
L.

Datasheet Details

Part number	NCP2824
Manufacturer	ON Semiconductor
File Size	303.92 KB
Description	Non-Clip and Power Limit Mono Class-D Amplifier
Datasheet	NCP2824 Datasheet
Additional preview pages of the NCP2824 datasheet.

📁 Similar Datasheet

NCP2809 - 135mW Stereo Headphone Power Amplifier (ON)

NCP2890 - 1.0 Watt Audio Power Amplifier (ON)

NCP21WB333J03RA - Thermistors (Murata)

NCP21WB333x03RA - NTC Thermistors (Murata)

NCP21WB473J03RA - Thermistors (Murata)

NCP21WB473x03RA - NTC Thermistors (Murata)

NCP21WF104J03RA - Thermistors (Murata)

NCP21WF104x03RA - NTC Thermistors (Murata)

NCP21XM221J03RA - Thermistors (Murata)

NCP21XM221x03RA - NTC Thermistors (Murata)

Full PDF Text Transcription

Click to expand full text

NCP2824 Non-Clip and Power Limit Mono Class D Amplifier with AGC Description The NCP2824 is a Filterless Class D amplifier capable of delivering up to 2.4 W to a 4 W load with a 5 V supply voltage. With the same battery voltage, it can deliver 1.2 W to an 8 W load with less than 1% THD+N. The non−clipping function automatically adjusts the output voltage in order to control the distortion when an excessive input is applied to the amplifier. This adjustment is done thanks to an Automatic Gain Control circuitry (AGC) built into the chip. A simple Single wire interface allows to the non Clipping function to be enabled and disabled. It also allows the maximum distortion level in the output to be configured.

Published: Oct 17, 2023 |