NCP303750 Overview
1 PWM PWM Control Input and Zero Current Detection Enable PWM divider resistors connected in both states when DISB# = High PWM divider resistors disconnected in both states when DISB# = Low 2 ZCD# ZCD / FCCM select input (see Table 1): ZCD# = High − Placing PWM into mid-state pulls GH and GL low without delay. There is an internal pull-up resistor to VCC on this pin when DISB# = High.
NCP303750 Key Features
- Capable of Average Currents up to 50 A
- Overcurrent Protection: 90 A Minimum
- Capable of Switching at Frequencies up to 1 MHz
- patible with 3.3 V or 5 V PWM Input
- Responds Properly to 3-level PWM Inputs
- Option for Zero Cross Detection with 3-level PWM
- Internal Bootstrap Diode
- Undervoltage Lockout
- Low Power Shutdown Mode
- Thermal Warning Output