Datasheet4U Logo Datasheet4U.com

NCP3235 Datasheet High Current Synchronous Buck Converter

Manufacturer: onsemi

Overview: NCP3235 Buck Converter - High Current, Synchronous The NCP3235 is a high current, high efficiency voltage mode synchronous buck converter which operates from 4.5 V to 23 V input and generates output voltages down to 0.6 V at up to 15 A continuous current. It has two operation modes: FCCM and automatic CCM/DCM. In automatic CCM/DCM mode, the controller can switch smoothly between CCM and DCM, where converter runs at reduced switching frequency to achieve much higher efficiency at light load. The NCP3235 is available in 6 mm x 6 mm QFN−40 pin package.

Key Features

  • Wide Input Voltage Range from 4.5 V to 23 V.
  • 0.6 V Internal Reference Voltage.
  • Switching Frequency Option: 550 kHz, 1.1 MHz.
  • External Programmable Soft.
  • Start.
  • Lossless Low.
  • side FET Current Sensing.
  • Output Over.
  • voltage Protection and Under.
  • voltage Protection.
  • Selective Hiccup/Latch Off Operation for All Faults.
  • Pre.
  • bias Start.
  • up.
  • Adjustable Output Voltage.
  • Pow.

NCP3235 Distributor

More Datasheets from onsemi

Part Number Description
NCP3230 High Current Synchronous Buck Converter
NCP3231 High Current Synchronous Buck Converter
NCP3231A High Current Synchronous Buck Converter
NCP3232N High Current Synchronous Buck Converter
NCP3233 High Current Synchronous Buck Converter
NCP3237 8A Integrated Synchronous Buck Converter
NCP3218 Mobile CPU Synchronous Buck Controller
NCP3218A Mobile CPU Synchronous Buck Controller
NCP3218G Mobile CPU Synchronous Buck Controller
NCP3284 Single-Phase Voltage Regulator