Datasheet4U Logo Datasheet4U.com

NCP338 - 2A Ultra-Small Controlled Load Switch

Description

Pin Name Pin Number Type IN A2, B2 POWER GND EN OUT C1 C2 A1, B1 POWER INPUT OUTPUT Description Load

switch input voltage; connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC.

Ground connection.

Enable input, logic high turns on power switch.

Features

  • 1.0 V.
  • 3.6 V Operating Range.
  • 16 mW P MOSFET at 3.6 V.
  • DC Current Up to 2 A.
  • Output Auto.
  • discharge.
  • Active High EN Pin.
  • WLCSP6 0.8 x 1.2 mm.
  • ESD Ratings: 6 kV HBM, 250 V MM.
  • This is a Pb.
  • Free Device Typical.

📥 Download Datasheet

Datasheet preview – NCP338

Datasheet Details

Part number NCP338
Manufacturer ON Semiconductor
File Size 139.16 KB
Description 2A Ultra-Small Controlled Load Switch
Datasheet download datasheet NCP338 Datasheet
Additional preview pages of the NCP338 datasheet.
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
NCP338 2A Ultra-Small Controlled Load Switch with Auto-discharge Path The NCP338 is very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy. Indeed, due to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected IC on the battery when not used. Output discharge path is also embedded to eliminate residual voltages on the output rail. Proposed in a wide input voltage range from 1.0 V to 3.6 V, in a small 0.8 x 1.2 mm WLCSP6, pitch 0.4 mm. Features • 1.0 V − 3.6 V Operating Range • 16 mW P MOSFET at 3.6 V • DC Current Up to 2 A • Output Auto−discharge • Active High EN Pin • WLCSP6 0.8 x 1.
Published: |