NCP4208 Datasheet | onsemi

VR11.1 Digital Programmable 8-Phase Synchronous Buck Converter with I2C Interface The NCP4208 is an integrated power control IC with an I2C interface. The NCP4208 is a highly efficient, multiphase, synchronous buck switching regulator controller, which aids design of High Efficiency and High Density solutions. The NCP4208 can be programmed for 1- , 2- , 3- , 4- , 5- , 6- , 7- or 8- phase operation, allowing for the construction of up to 8 plementary buck switching stages. The NCP4208 supports PSI, which is a power state indicator and can be used to reduce the number of operating phases at light loads. The I2C interface enables digital programming of key system parameters to optimize system performance and provide feedback to the system. The NCP4208 has a built in shunt regulator that allows the part to be powered from the +12 V system supply through a series resistor. The NCP4208 is specified over the extended mercial temperature range of 0°C to +85°C and is available in a 48 Lead QFN package. Features - Selectable 1- , 2- , 3- , 4- , 5- , 6- , 7- or 8- Phase Operation at Up to 1.5 MHz per Phase - Temperature Measurement - Logic- Level PWM Outputs for Interface to External High Power Drivers - Fast- Enhanced PWM for Excellent Load Transient Performance - Active Current Balancing Between All Output Phases - Built- In Power- Good/Crowbar Blanking Supports On- The- Fly (OTF) VID Code Changes - Digitally Programmable 0.375 V to 1.6 V Output Supports VR11.1 Specifications - Short Circuit Protection with Latchoff Delay - Supports PSI Power Saving Mode During Light Loads - This is a Pb- Free Device Applications - Desktop PC - Servers © Semiconductor ponents Industries, LLC, 2013 September, 2013 - Rev. 5 1 http://onsemi. 1...