Datasheet4U Logo Datasheet4U.com

NCP4300A Datasheet Dual Operational Amplifier And Voltage Reference

Manufacturer: onsemi

Overview: NCP4300A Dual Operational Amplifier and Voltage Reference The NCP4300A is a monolithic integrated circuit specifically designed to control the output current and voltage levels of switch mode battery chargers and power supplies. This device contains a precision 2.6 V shunt reference and two operational amplifiers. Op−Amp 1 is designed to perform voltage control and has its non−inverting input internally connected to the reference. Op−Amp 2 is designed for current control and has both inputs unmitted.

Key Features

  • increased precision with a corresponding reduction in system complexity and cost. This device is available in an 8.
  • lead surface mount package. Features.
  • This is a Pb.
  • Free Device Operational Amplifier.
  • Low Input Offset Voltage: 0.5 mV.
  • Input Common Mode Voltage Range Includes Ground.
  • Low Supply Current: 210 mA/Op.
  • Amp (@VCC = 5.0 V).
  • Medium Unity Gain Bandwidth: 0.7 MHz.
  • Large Output Voltage Swing: 0 V to VCC.
  • 1.

More Datasheets from onsemi

Part Number Description
NCP4302 Synchronous Rectification Controller
NCP4303A Secondary Side Synchronous Rectification Driver
NCP4303B Secondary Side Synchronous Rectification Driver
NCP4304A Secondary Side Synchronous Rectification Driver
NCP4304B Secondary Side Synchronous Rectification Driver
NCP4305 Secondary Side Synchronous Rectification Driver
NCP4306 Secondary Side Synchronous Rectification Driver
NCP4307 Secondary Side Synchronous Rectification Driver
NCP4308 Synchronous Rectifier Controller
NCP43080 Synchronous Rectifier Controller

NCP4300A Distributor