Datasheet4U Logo Datasheet4U.com

NCP435 Datasheet 2A Ultra-Small Controlled Load Switch

Manufacturer: onsemi

Download the NCP435 datasheet PDF. This datasheet also includes the NCP434 variant, as both parts are published together in a single manufacturer document.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (NCP434_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number NCP435
Manufacturer onsemi
File Size 644.00 KB
Description 2A Ultra-Small Controlled Load Switch
Datasheet download datasheet NCP435 Datasheet

General Description

Pin Name Pin Number Type IN A2 POWER GND EN OUT B1 POWER B2 INPUT A1 OUTPUT Description Load−switch input voltage;

connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC.

Ground connection.

Overview

NCP434, NCP435 2A Ultra-Small Controlled Load Switch with Auto-Discharge Path The NCP434 and NCP435 are a low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy.

Indeed, due to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected IC’s on the battery when not used.

Output discharge path is also embedded to eliminate residual voltages on the output (NCP435 only).

Key Features

  • 1 V.
  • 3.6 V Operating Range.
  • 29 mW P MOSFET at 3.3 V.
  • DC current up to 2 A.
  • Output Auto.
  • discharge (NCP435).
  • Active high EN pin.
  • WLCSP4 0.96 x 0.96 mm.
  • These are Pb.
  • Free Devices Typical.