NCP45540 Overview
float if not used 6 PG Active−high, open−drain output that indicates when the gate of the MOSFET is fully driven, external pull up resistor ≥ 1 kW to an external voltage source required; 7 BLEED Load bleed connection, must be tied to VOUT either directly or through a resistor ≤ 1 kW 8 9−12 NC VOUT No connect, internally floating but pin may be tied to VOUT Source of MOSFET connected to load Table 2. RATINGS Rating...
NCP45540 Key Features
- Advanced Controller with Charge Pump
- Integrated N-Channel MOSFET with Low RON
- Input Voltage Range 0.5 V to 13.5 V
- Soft-Start via Controlled Slew Rate
- Adjustable Slew Rate Control
- Power Good Signal
- Thermal Shutdown
- Undervoltage Lockout
- Short-Circuit Protection
- Extremely Low Standby Current
NCP45540 Applications
- Advanced Controller with Charge Pump
- Integrated N-Channel MOSFET with Low RON
- Input Voltage Range 0.5 V to 13.5 V