NCS2005 Datasheet | onsemi

Operational Amplifier, Low Power, 8 MHz GBW, Rail-to-Rail Input-Output The NCS2005 provides high performance in a wide range of applications. The NCS2005 offers beyond rail- to- rail input range, full rail- to- rail output swing, large capacitive load driving ability, and low distortion. The inputs can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the mon- mode voltage range. The rail- to- rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. Operating on supplies of 2.2 V to 32 V, the NCS2005 is excellent for a very wide range of applications in low power systems. With a supply current of 1.3 m A, the 8 MHz gain- bandwidth of this device supports applications where faster speeds are required. Placing the amplifier right at the signal source reduces board size and simplifies signal routing. The NCS2005 is available in a space- saving 5- pin SOT- 23 package. Features - Wide Power Supply Range: 2.2 V to 32 V - mon Mode Voltage Range Wider than Rail- to- Rail: VCM = - 0.1 V to 5.1 V @ VS = 5 V - Wide Gain- bandwidth: 8 MHz typical - Low Supply Current: 1.3 m A typical - Stable with a 1 n F Capacitor Load with a Phase Margin over 25° @ VS = 10 V - Available in a Space- saving 5- pin SOT23 Package - These devices are Pb- free, Halogen free/BFR Free and are Ro HS pliant Typical Applications - Active Filters - Voltage Referenced Buffers - Sensors and Instrumentation - Microphone Amplifiers - ASIC Input Drivers - Portable munications - PCMCIA Cards .onsemi. 5 1 SOT23- 5 SN SUFFIX CASE 483 MARKING DIAGRAM JFKAYWG G JFK = Specific Device Code A = Assembly Location Y = Year W = Work Week G = Pb- Free...