NCS36000 - Passive Infrared (PIR) Detector Controller

onsemi

General Description

Pin No.

Key Features

3.0.
5.75 V Operation.
40 to 85°C.
14 Pin SOIC Package.
Integrated 2.
Stage Amplifier.
Internal LDO to Drive Sensor.
Internal Oscillator with External RC.
Single or Dual Pulse Detection.
Direct Drive of LED and OUT.
This is a Pb.
Free Device Typical.

📥 Download Datasheet

NCS36000 passive infrared (pir) detector controller by onsemi - Datasheet Preview

Datasheet Details

Part number	NCS36000
Manufacturer	onsemi
File Size	263.01 KB
Description	Passive Infrared (PIR) Detector Controller
Datasheet	NCS36000 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NCS37021	Self-Test Ground Fault Circuit Interrupter	onsemi
NCS3S1203SC	Isolated 3W 4:1 Input Single Output DC-DC Converters	muRata
NCS3S1205SC	Isolated 3W 4:1 Input Single Output DC-DC Converters	muRata
NCS3S1212SC	Isolated 3W 4:1 Input Single Output DC-DC Converters	muRata
NCS3S1215SC	Isolated 3W 4:1 Input Single Output DC-DC Converters	muRata

Other Datasheets by onsemi

Part Number	Description
NCS36510	Low Power System-on-Chip
NCS32100	Inductive Position Sensor
NCS325	Zero-Drift Operational Amplifier
NCS333	Zero-Drift Operational Amplifier
NCS333A	Zero-Drift Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Passive Infrared (PIR) Detector Controller NCS36000 The NCS36000 is a fully integrated mixed−signal CMOS device designed for low−cost passive infrared controlling applications. The device integrates two low−noise amplifiers and a LDO regulator to drive the sensor. The output of the amplifiers goes to a window comparator that uses internal voltage references from the regulator. The digital control circuit processes the output from the window comparator and provides the output to the OUT and LED pin. Features • 3.0 − 5.