NCS7101 Datasheet 1.8 Volt Rail-to-Rail Operational Amplifier

Manufacturer: onsemi

NCS7101 1.8 volt rail-to-rail operational amplifier by onsemi - Datasheet Preview

Datasheet Details

Part number	NCS7101
Manufacturer	onsemi
File Size	287.99 KB
Description	1.8 Volt Rail-to-Rail Operational Amplifier
Datasheet	NCS7101 Datasheet

Overview

1.8 Volt Rail-to-Rail Operational Amplifier NCS7101, NCV7101 The NCS7101 operational amplifier provides rail−to−rail operation on both the input and output.

The output can swing within 50 mV of each rail.

This rail−to−rail operation enables the user to make full use of the entire supply voltage range available.

Key Features

Low Voltage, Single Supply Operation (1.8 V and Ground to 10 V and Ground).
1.0 pA Input Bias Current.
Unity Gain Bandwidth of 1.0 MHz at 5.0 V, 0.9 MHz at 1.8 V.
Output Voltage Swings Within 50 mV of Both Rails @ 1.8 V.
No Phase Reversal on the Output for Over.
Driven Input Signals.
Input Offset Voltage of 9 mV Max.
Low Supply Current (ID = 1.0 mA).
Works Down to Two Discharged NiCd Battery Cells.
ESD Prote.

More Datasheets from onsemi

Part Number	Description
NCS7041	Current Sense Amplifier
NCS1002	Constant Voltage/Constant Current Secondary-Side Controller
NCS1002A	Constant Voltage/Constant Current Secondary-Side Controller
NCS12802	12-Channel I2C Programmable Gamma Voltage Reference Generator
NCS199A1	Current-Shunt Monitor
NCS199A1R	Current-Shunt Monitors
NCS199A2	Current-Shunt Monitor
NCS199A2R	Current-Shunt Monitors
NCS199A3	Current-Shunt Monitor
NCS199A3R	Current-Shunt Monitors