Datasheet4U Logo Datasheet4U.com

NCV3065 - Constant Current Buck Boosting Inverting Switching Regulator

General Description

Pin No.

N.C.

Key Features

  • Integrated 1.5 A Switch.
  • Input Voltage Range from 3.0 V to 40 V.
  • Low Feedback Voltage of 235 mV.
  • Cycle.
  • by.
  • Cycle Current Limit.
  • No Control Loop Compensation Required.
  • Frequency of Operation Adjustable up to 250 kHz.
  • Operation with All Ceramic Output Capacitors or No Output Capacitance.
  • Analog and Digital PWM Dimming Capability.
  • Internal Thermal Shutdown with Hysteresis.
  • Automotive Version Av.

📥 Download Datasheet

Datasheet Details

Part number NCV3065
Manufacturer onsemi
File Size 365.29 KB
Description Constant Current Buck Boosting Inverting Switching Regulator
Datasheet download datasheet NCV3065 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV3025833 Smart Power Stage onsemi
NCV2902 Single Supply Quad Operational Amplifiers ON
NCV4279 5.0V Micropower 150mA LDO Linear Regulator ON
NCV51153 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCV51563 4.5-A/9-A Isolated Dual Channel Gate Driver onsemi

Other Datasheets by onsemi

Part Number Description
NCV3063 Step-Up/Down/Inverting Switching Regulators
NCV3064 Switching Regulator
NCV3066 Constant Current Buck Boost Inverting Switching Regulator
NCV3011 Synchronous PWM Controller
NCV3020A Synchronous PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com Constant Current Step-Up/ Step-Down/Inverting Switching Regulator for HB-LEDs 1.5 A NCP3065, NCV3065 The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs. The device has a very low feedback voltage of 235 mV (nominal) which is used to regulate the average current of the LED string. In addition, the NCP3065 has a wide input voltage up to 40 V to allow it to operate from 12 Vac or 12 Vdc supplies commonly used for lighting applications as well as unregulated supplies such as Lead Acid batteries. The device can be configured in a controller topology with the addition of an external transistor to support higher LED currents beyond the 1.5 A rated switch current of the internal transistor.