Datasheet4U Logo Datasheet4U.com

NCV360 - USB Positive Overvoltage Protection Controller

Datasheet Summary

Description

Pin No.

INPUT Enable Pin.

The device enters in shutdown mode when this pin is tied to a high level.

Features

  • Very Fast Protection, Up to 20 V, with 25 mA Current Consumption.
  • On.
  • chip PMOS Transistor.
  • Overvoltage Lockout (OVLO).
  • Undervoltage Lockout (UVLO).
  • Alert FLAG Output.
  • EN Enable Pin.
  • Thermal Shutdown.
  • Compliance to IEC61000.
  • 4.
  • 2 (Level 4) 8 kV (Contact) 15 kV (Air).
  • ESD Ratings: Machine Model = B ESD Ratings: Human Body Model = 2.
  • 6 Lead UDFN 2x2 mm Package.
  • 5 Lead TSOP 3x3 mm Package.
  • NCV Prefix for Automotive an.

📥 Download Datasheet

Datasheet preview – NCV360

Datasheet Details

Part number NCV360
Manufacturer ON Semiconductor
File Size 945.71 KB
Description USB Positive Overvoltage Protection Controller
Datasheet download datasheet NCV360 Datasheet
Additional preview pages of the NCV360 datasheet.

📁 Similar Datasheet

  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
Other Datasheets by ON Semiconductor
  • NCV361 - USB Positive Overvoltage Protection Controller
  • NCV3011 - Synchronous PWM Controller
  • NCV3020A - Synchronous PWM Controller
  • NCV3020B - Synchronous PWM Controller
  • NCV3030A - Synchronous PWM Controller
  • NCV3030B - Synchronous PWM Controller
  • NCV3063 - Step-Up/Down/Inverting Switching Regulators
  • NCV3064 - Switching Regulator

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com USB Positive Overvoltage Protection Controller with Internal PMOS FET and Status FLAG NCP360, NCV360 The NCP360 disconnects systems at its output when wrong VBUS operating conditions are detected at its input. The system is positive overvoltage protected up to +20 V. Thanks to an integrated PMOS FET, no external device is necessary, reducing the system cost and the PCB area of the application board. The NCP360 is able to instantaneously disconnect the output from the input if the input voltage exceeds the overvoltage threshold (OVLO). The NCP360 provides a negative going flag (FLAG) output, which alerts the system that a fault has occurred. In addition, the device has ESD−protected input (15 kV Air) when bypassed with a 1 mF or larger capacitor.
Published: |