Datasheet4U Logo Datasheet4U.com

NCV4299A - 150mA Low-Dropout Voltage Regulator

Description

Pin No.

Pin No.

14 TSSOP

RADJ Reset Adjust.

Use resistor divider to Q to adjust reset threshold lower.

Connect to GND if not used.

GND G

Features

  • microprocessor interfaces including an adjustable reset output and adjustable system monitor to provide shutdown early warning. An inhibit function is available. With inhibit active, the regulator turns off and the device consumes less than 1.0 mA of quiescent current. The part can withstand load dump transients making it suitable for use in automotive environments. Features.
  • 5.0 V, 3.3 V ±2%, 150 mA.
  • Extremely Low Current Consumption.
  • 65 mA (Typ) in the ON Mode.

📥 Download Datasheet

Datasheet preview – NCV4299A

Datasheet Details

Part number NCV4299A
Manufacturer ON Semiconductor
File Size 341.32 KB
Description 150mA Low-Dropout Voltage Regulator
Datasheet download datasheet NCV4299A Datasheet
Additional preview pages of the NCV4299A datasheet.

📁 Similar Datasheet

  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
NCV4299A Voltage Regulator Low-Dropout 150 mA The NCV4299A is a family of precision micropower voltage regulators with an output current capability of 150 mA. It is available in 5.0 V or 3.3 V output voltage. The output voltage is accurate within "2% with a maximum dropout voltage of 0.5 V at 100 mA. Low Quiescent current is a feature drawing only 65 mA with a 100 mA load. This part is ideal for any and all battery operated microprocessor equipment. The device features microprocessor interfaces including an adjustable reset output and adjustable system monitor to provide shutdown early warning. An inhibit function is available. With inhibit active, the regulator turns off and the device consumes less than 1.0 mA of quiescent current.
Published: |