Datasheet4U Logo Datasheet4U.com

NCV5104 Datasheet Half Bridge Driver

Manufacturer: onsemi

Overview: NCP5104, NCV5104 High Voltage, Half Bridge Driver The NCP5104 is a High Voltage Power gate Driver providing two outputs for direct drive of 2 N−channel power MOSFETs or IGBTs arranged in a half−bridge configuration. It uses the bootstrap technique to insure a proper drive of the High−side power switch.

Key Features

  • High Voltage Range: up to 600 V.
  • dV/dt Immunity ±50 V/nsec.
  • Gate Drive Supply Range from 10 V to 20 V.
  • High and Low Drive Outputs.
  • Output Source / Sink Current Capability 250 mA / 500 mA.
  • 3.3 V and 5 V Input Logic Compatible.
  • Up to VCC Swing on Input Pins.
  • Extended Allowable Negative Bridge Pin Voltage Swing to.
  • 10 V for Signal Propagation.
  • Matched Propagation Delays between Both Channels.
  • 1 Input.

More Datasheets from onsemi

Part Number Description
NCV5106A 600V Automotive High and Low Side Driver
NCV5106B 600V Automotive High and Low Side Driver
NCV511 Low-Dropout Voltage Regulator
NCV51152 Single Channel Gate Driver
NCV51190 1.5A DDR Memory Termination Regulator
NCV51198 1.5A DDR Memory Termination Regulator
NCV51199 Termination Regulator
NCV51200 Linear Voltage Regulator
NCV51400 3Amp Termination Regulator
NCV51411 Low Voltage Buck Regulator

NCV5104 Distributor