Datasheet4U Logo Datasheet4U.com

NCV5183 - High Voltage High Current High and Low Side Driver

General Description

Pin No.

Key Features

  • Automotive Qualified to AEC Q100.
  • Voltage Range: up to 600 V.
  • dV/dt Immunity 50 V/ns.
  • Gate Drive Supply Range from 9 V to 18 V.
  • Output Source / Sink Current Capability 4.3 A / 4.3 A.
  • 3.3 V and 5 V Input Logic Compatible.
  • Extended Allowable Negative Bridge Pin Voltage Swing to.
  • 10 V  Matched Propagation Delays between Both Channels  Propagation Delay 120 ns typically  Under VCC LockOut (UVLO) for Both Channels.
  • Pin to Pin Compatible with Indust.

📥 Download Datasheet

Datasheet Details

Part number NCV5183
Manufacturer onsemi
File Size 552.80 KB
Description High Voltage High Current High and Low Side Driver
Datasheet download datasheet NCV5183 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV51153 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCV51563 4.5-A/9-A Isolated Dual Channel Gate Driver onsemi
NCV551 Low-Dropout Voltage Regulator ON
NCV2902 Single Supply Quad Operational Amplifiers ON
NCV3025833 Smart Power Stage onsemi

Other Datasheets by onsemi

Part Number Description
NCV5104 Half Bridge Driver
NCV5106A 600V Automotive High and Low Side Driver
NCV5106B 600V Automotive High and Low Side Driver
NCV511 Low-Dropout Voltage Regulator
NCV51152 Single Channel Gate Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
High Voltage High Current High and Low Side Driver NCP5183, NCV5183 The NCP5183 is a High Voltage High Current Power MOSFET Driver providing two outputs for direct drive of two N−channel power MOSFETs arranged in a half−bridge (or any other high−side + low−side) configuration. It uses the bootstrap technique to insure a proper drive of the High−side power switch. The driver works with two independent inputs to accommodate any topology (including half−bridge, asymmetrical half−bridge, active clamp and full−bridge…). Features  Automotive Qualified to AEC Q100  Voltage Range: up to 600 V  dV/dt Immunity 50 V/ns  Gate Drive Supply Range from 9 V to 18 V  Output Source / Sink Current Capability 4.3 A / 4.3 A  3.