NCV57100 Datasheet | onsemi

DATA SHEET .onsemi. Isolated High Current Gate Driver Product Preview NCD57100, NCD57101, NCV57100, NCV57101 NCx5710y is a high- current single channel IGBT / Si C / MOSFET driver with internal galvanic isolation, designed for high system efficiency and reliability in high power applications. Its Features include plementary inputs, open drain FAULT and READY outputs, active MILLER CLAMP, accurate UVLOs, DESAT protection and DESAT diagnostic function, soft turn- off at DESAT, Disable output function and separate high and low (OUTH and OUTL) driver outputs (NCx57100) for system design convenience. NCx5710y acmodates both 5 V and 3.3 V signals on the input side and wide bias voltage range on the driver side including negative voltage capability. NCx5710y provides > 5 k Vrms (UL1577 rating) galvanic isolation and > 1424 VPK (working voltage) capabilities. NCx5710y is available in the wide- body SOIC- 16 package with guaranteed 8 mm creepage distance between input and output to fulfill reinforced safety insulation requirements. Features - High Current Peak Output (±7 A) - Low Output Impedance for Enhanced Power Switch Driving - Short Propagation Delays with Accurate Matching - Active Miller Clamp to Prevent Spurious Gate Turn- on - DESAT Protection with Programmable Delay - DESAT Diagnostic Function (DSCHK) - Output Disable Function - Negative Voltage (Down to - 8 V) Capability for DESAT - Soft Turn Off During Power Switch Short Circuit - Gate Clamping During Short Circuit - Tight UVLO Thresholds for Bias Flexibility - Wide Bias Voltage Range including Negative VEE2 - 3.3 V to 5 V Input Supply Voltage - Designed for AEC- Q100 Certification - 5000 V Galvanic Isolation (to meet UL1577 Requirements) - 1424 VPK / 1000 VRMS Working Voltage (per VDE0884- 11 Requirements) - High Transient Immunity - High Electromagnetic Immunity - NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable -...