Datasheet4U Logo Datasheet4U.com

NCV68061 - Ideal Diode NMOS Controller

Datasheet Summary

Description

Pin No.

Not Connected.

Not internally bonded.

This pin can be left floating or connected to GND on the PCB.

Features

  • Operating Voltage Range: up to 32 V.
  • Immune to 60 V Load Dump Pulse.
  • Immune to.
  • 40 V Negative Transient.
  • Ideal Diode Function.
  • Protecting against Reverse Current Flow (from Output to Input).
  • Reverse Polarity Protection (RPP) Function.
  • Protecting against Negative Supply.
  • Enable Function (3.3 V Logic Compatible Thresholds).
  • NCV Prefix for Automotive and Other.

📥 Download Datasheet

Datasheet preview – NCV68061

Datasheet Details

Part number NCV68061
Manufacturer ON Semiconductor
File Size 216.55 KB
Description Ideal Diode NMOS Controller
Datasheet download datasheet NCV68061 Datasheet
Additional preview pages of the NCV68061 datasheet.

📁 Similar Datasheet

  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
Other Datasheets by ON Semiconductor
  • NCV68261 - Ideal Diode and High Side Switch NMOS Controller
  • NCV612 - CMOS Low Iq Voltage Regulator
  • NCV6323 - 2A Synchronous Buck Converter
  • NCV6323F - PWM Synchronous Buck Converter
  • NCV6324 - 2A Synchronous Buck Converter
  • NCV6334B - 2A Synchronous Buck Converter
  • NCV6354 - 3MHz 2A Fixed-Frequency Synchronous Buck Converter
  • NCV6356 - AOT Step Down Converter

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com Ideal Diode NMOS Controller NCV68061 The NCV68061 is a Reverse Polarity Protection and Ideal Diode NMOS Controller, intended as a lower loss and lower forward voltage replacement for power rectifier diodes. The controller operates in conjunction with an N−channel MOSFET for low power loss. The main function of the NCV68061 is to control the ON/OFF state of the external NMOS according to the Source to Drain differential voltage polarity. Depending on the Drain pin connection, the device can be configured as two different application modes. With the Drain pin connected to the load, the application is in Ideal Diode mode, whereas with the Drain pin connected to ground, the application is merely in Reverse Polarity Protection mode.
Published: |