Datasheet4U Logo Datasheet4U.com

NCV70516 - Micro-stepping Motor Driver

General Description

The NCV70516 is a micro

stepper motors.

The chip is connected through I/O pins and an SPI interface with an external microcontroller.

translation table and takes the next micro step depending on the clo

Key Features

  • Dual H.
  • bridge for 2.
  • phase Stepper Motors.
  • Programmable Peak.
  • current up to 800 mA.
  • Low Temperature Boost Current up to 1100 mA.
  • On.
  • chip Current Translator.
  • SPI Interface.
  • 5 Step Modes from Full.
  • step up to 16 Micro.
  • steps.
  • Fully Integrated Current.
  • sensing and Current.
  • regulation.
  • PWM Current Control with Automatic Selection of Fast and Slow Decay.
  • Fixed PW.

📥 Download Datasheet

Datasheet Details

Part number NCV70516
Manufacturer onsemi
File Size 432.48 KB
Description Micro-stepping Motor Driver
Datasheet download datasheet NCV70516 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV70628 Micro-stepping Motor Driver onsemi
NCV7383 Transceiver ON Semiconducto
NCV7410 Automotive Ethernet Transceiver onsemi
NCV7424 Four Channel LIN Transceiver ON Semiconducto
NCV7518 Hex Low side MOSFET Pre driver ON Semiconducto

Other Datasheets by onsemi

Part Number Description
NCV70514 Micro-stepping Motor Driver
NCV70517 Micro-stepping Motor Driver
NCV70501 Micro-Stepping Motor Driver
NCV70521 Micro-Stepping Motor Driver
NCV70522 Micro-Stepping Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Micro-stepping Motor Driver NCV70516 Description The NCV70516 is a micro−stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and an SPI interface with an external microcontroller. The NCV70516 contains a current−translation table and takes the next micro−step depending on the clock signal on the “NXT” input pin and the status of the “DIR” (= direction) register or input pin. The chip provides an error message if an electrical error, an under−voltage or an elevated junction temperature is detected. It is using a proprietary PWM algorithm for reliable current control.