NCV7342 Datasheet | onsemi

High Speed Low Power CAN Transceiver Description The NCV7342 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. The NCV7342 is an addition to the CAN high- speed transceiver family plementing NCV734x CAN stand- alone transceivers and previous generations such as AMIS42665, AMIS3066x, etc. Due to the wide mon- mode voltage range of the receiver inputs and other design Features , the NCV7342 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals. Features - patible with the ISO 11898- 2, ISO 11898- 5 Standards - High Speed (up to 1 Mbps) - VIO Pin on NCV7342- 3 Version Allowing Direct Interfacing with 3 V to 5 V Microcontrollers - VSPLIT Pin on NCV7342- 0 Version for Bus mon Mode Stabilization - Very Low Current Consumption in Standby Mode with Wake- up via the Bus - Excellent Electromagnetic Susceptibility (EMS) Level Over Full Frequency Range. Very Low Electromagnetic Emissions (EME) Low EME Also Without mon Mode (CM) Choke - Bus Pins Protected Against >15 k V System ESD Pulses - Transmit Data (Tx D) Dominant Time- out Function - Bus Dominant Time- out function in Standby Mode - Under All Supply Condition the Chip Behaves Predictably - No Disturbance of the Bus Lines with an Unpowered Node - Thermal Protection - Bus Pins Protected Against Transients in an Automotive Environment - Bus Pins Short Circuit Proof to Supply Voltage and Ground - These are Pb- Free Devices Quality - Wettable Flank Package for Enhanced Optical Inspection - NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable Typical...