Datasheet4U Logo Datasheet4U.com

NCV7422 - LIN Transceiver

Description

Local Interconnect Network (LIN) protocol.

It allows interfacing of two independent LIN physical buses and the LIN protocol controllers.

4, LIN2.2a, LIN2.2, LIN2.1, LIN 2.0 and SAEJ2602 standard

Features

  • DFN.
  • 14 Green Package (Pb.
  • Free) LIN.
  • Bus Transceiver.
  • Compliant to ISO 17987.
  • 4 (Backwards Compatible to LIN Specification rev. 2.x, 1.3) and SAE J2602.
  • Bus Voltage ±42 V.
  • Transmission Rate 1 kbps to 20 kbps.
  • TxD Timeout Function.
  • Integrated Slope Control Protection.
  • Thermal Shutdown.
  • Undervoltage Detection.
  • Bus Pins Protected Against Transients in an Automotive Environment Modes.

📥 Download Datasheet

Datasheet preview – NCV7422

Datasheet Details

Part number NCV7422
Manufacturer ON Semiconductor
File Size 284.60 KB
Description LIN Transceiver
Datasheet download datasheet NCV7422 Datasheet
Additional preview pages of the NCV7422 datasheet.

📁 Similar Datasheet

  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7518 - Hex Low side MOSFET Pre driver (ON Semiconducto)
  • NCV7719 - Octal Half-Bridge Driver (ON Semiconducto)
  • NCV78514 - 1-Channel Automotive LED Driver (onsemi)
  • NCV78902 - High Efficiency 2 Phase Booster LED Driver (onsemi)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
LIN Transceiver, Dual NCV7422 Description The NCV7422 is a two channel physical layer device using the Local Interconnect Network (LIN) protocol. It allows interfacing of two independent LIN physical buses and the LIN protocol controllers. The device is compliant to ISO 17987−4, LIN2.2a, LIN2.2, LIN2.1, LIN 2.0 and SAEJ2602 standards. The NCV7422 LIN device is a member of the in−vehicle networking (IVN) transceiver family. The LIN bus is designed to communicate low−rate data from control devices such as door locks, mirrors, car seats and sunroofs at the lowest possible cost. The bus is designed to eliminate as much wiring as possible and is implemented using a single wire in each node.
Published: |