NCV7718 - Hex Half-Bridge Driver

onsemi

General Description

The pin out for the Hex Half

Bridge in SSOP24 package is shown in the table below.

Ground.

Shorted to pin 24 internally.

Key Features

designed specifically for automotive and industrial motion control.

📥 Download Datasheet

NCV7718 hex half-bridge driver by onsemi - Datasheet Preview

Datasheet Details

Part number	NCV7718
Manufacturer	onsemi
File Size	368.03 KB
Description	Hex Half-Bridge Driver
Datasheet	NCV7718 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NCV7719	Octal Half-Bridge Driver	ON Semiconducto
NCV70628	Micro-stepping Motor Driver	onsemi
NCV7383	Transceiver	ON Semiconducto
NCV7410	Automotive Ethernet Transceiver	onsemi
NCV7424	Four Channel LIN Transceiver	ON Semiconducto

Other Datasheets by onsemi

Part Number	Description
NCV7718B	Hex Half-Bridge Driver
NCV7718C	Hex Half-Bridge Driver
NCV7710	Door-Module Driver-IC
NCV7701	H-Bridge Driver
NCV7702B	1A Dual H-Bridge Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Hex Half-Bridge Driver NCV7718 The NCV7718 is a Hex Half−Bridge Driver with protection features designed specifically for automotive and industrial motion control applications. The NCV7718 has independent controls and diagnostics. The device can be operated in forward, reverse, brake, and high impedance states. The drivers are controlled via a 16 bit SPI interface and are daisy chain compatible. Features • Low Quiescent Current Sleep Mode • High−Side and Low−Side Drivers Connected in a Half−Bridge Configuration • Integrated Freewheeling Protection (LS and HS) • 0.55 A Peak Current • RDS(on) = 1 W (typ) • 5 MHz SPI Control • Compliance with 5 V and 3.