NL7SZ19 - 1-of-2 Decoder/Demultiplexer

onsemi

Key Features

Designed for 1.65 V to 5.5 V VCC Operation.
2.7 ns tPD at VCC = 5 V (Typ).
Inputs/Outputs Overvoltage Tolerant up to 5.5 V.
IOFF Supports Partial Power Down Protection.
Sink 32 mA at 5.0 V.
Available in SC.
88, SC.
74 and UDFN6 Packages.
Chip Complexity < 100 FETs.
Q Suffix for Automotive and Other.

NL7SZ19 1-of-2 decoder/demultiplexer by onsemi - Datasheet Preview

Datasheet Details

Part number	NL7SZ19
Manufacturer	onsemi
File Size	255.87 KB
Description	1-of-2 Decoder/Demultiplexer
Datasheet	NL7SZ19 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NL714	(NL714 / NL715) Thyratron Tubes	National Electronics
NL715	(NL714 / NL715) Thyratron Tubes	National Electronics
NL716	Thyratron Tubes	National Electronics
NL740	(NL740 / NL741) THYRATRON TUBES 4 Amperes dc - 50 Amperes Peak	ETC
NL741	(NL740 / NL741) THYRATRON TUBES 4 Amperes dc - 50 Amperes Peak	ETC

Other Datasheets by onsemi

Part Number	Description
NL7SZ18	1-to-2 Demultiplexer
NL7SZ57	Configurable Multifunction Gate
NL7SZ58	Configurable Multifunction Gate
NL7SZ97	Configurable Multifunction Gate
NL7SZ98	Configurable Multifunction Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

DATA SHEET www.onsemi.com 1-to-2 Decoder/ Demultiplexer NL7SZ19 The NL7SZ19 is a 1−to−2 decoder. When the output enable (E) is Low, the device passes data at input A to outputs Y0 (true) and Y1 (complement). The NL7SZ19 can also be used as a 1−to−2 demultiplexer. As a demultiplexer, data at input E is routed to either Y0 or Y1 depending on the state of A. The device operates over the voltage range from 1.65 V to 5.5 V. Features • Designed for 1.65 V to 5.5 V VCC Operation • 2.7 ns tPD at VCC = 5 V (Typ) • Inputs/Outputs Overvoltage Tolerant up to 5.5 V • IOFF Supports Partial Power Down Protection • Sink 32 mA at 5.