Datasheet4U Logo Datasheet4U.com

NLSF595 Datasheet Serial (spi) Tri-color Led Driver

Manufacturer: onsemi

Overview: Serial (SPI) Tri-Color LED Driver NLSF595 The NLSF595 is advanced CMOS shift register with open drain outputs fabricated with 0.6 mm silicon gate CMOS technology. This device is used in conjunction with a microcontroller, with only one dedicated line. All pins have Overvoltage Protection that allows voltages above VCC up to 5.5 V to be present on the pins without damage or disruption of operation of the part, regardless of the operating voltage. This device may be used between 2.0 and 5.5 volts, the output driver level may be independent of supply voltage: 0−5.5 volts.

Key Features

  • Parallel Outputs are Open Drain Capable of Sinking > 12 mA.
  • Output Withstands up to +5.5 Regardless of VCC.
  • Standard Serial (SPI) Interface, Data, Clock, Enable (Low).
  • All Inputs CMOS Level Compatible.
  • Frees up I/O around a Microcontroller.
  • Only One Pin Dedicated to this Device (Latch Enable).
  • Output Enable may be Permanently Pulled Low.
  • High Speed Clocking, Fmax > 25 MHz (Shift Clock).
  • Eight Bits Parallel Output.

More Datasheets from onsemi

Part Number Description
NLSF1174 Hex D Flip-Flop
NLSF2500 Keypad Multiplexer
NLSF302 Quad 2-Input NOR Gate
NLSF308 Quad 2-Input AND Gate
NLSF3T125 Quad Bus Buffer
NLSF3T126 Quad Bus Buffer
NLSV1T240 1-Bit Dual-Supply Inverting Level Translator
NLSV1T240MUTBG 1-Bit Dual-Supply Inverting Level Translator
NLSV1T244 1-Bit Dual-Supply Non-Inverting Level Translator
NLSV1T34 1-Bit Dual-Supply Non-Inverting Level Translator

NLSF595 Distributor