Datasheet4U Logo Datasheet4U.com

NLSX4373 - Translator

General Description

VCC Input Voltage VL Input Voltage Ground Output Enable VCC I/O Port, Referenced to VCC VL I/O Port, Referenced to VL FUNCTION TABLE EN L H Operating Mode Hi Z I/O Buses Connected http://onsemi.com 2 Free Datasheet http://www.datasheet4u.com/ NLSX4373 MAXIMUM RATINGS Symbol VCC VL I/O VCC

Key Features

  • http://onsemi. com.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NLS-EM2027 2D Barcode Scan Engine Integration Guide Newland
NLSG06S01 GREEN STANDARD LED NICHIA CORPORATION
NLSL06S01A WARM NICHIA CORPORATION
NLSR06S01 RED STANDARD LED NICHIA CORPORATION

Other Datasheets by onsemi

Part Number Description
NLSX4378 Translator
NLSX4378A 4-Bit 24 Mb/s Dual-Supply Level Translator
NLSX4302E Translator
NLSX4014 Translator
NLSX4401 1-Bit 20 Mb/s Dual-Supply Level Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NLSX4373 2-Bit 20 Mb/s Dual-Supply Level Translator The NLSX4373 is a 2−bit configurable dual−supply bidirectional auto sensing translator that does not require a directional control pin. The VCC I/O and VL I/O ports are designed to track two different power supply rails, VCC and VL respectively. The VCC supply rail is configurable from 1.5 V to 5.5 V while VL supply rail is configurable to 1.5 V to 5.5 V. This allows voltage logic signals on the VL side to be translated into lower, higher or equal value voltage logic signals on the VCC side, and vice−versa. The NLSX4373 translator has open−drain outputs with integrated 10 kW pullup resistors on the I/O lines. The integrated pullup resistors are used to pullup the I/O lines to either VL or VCC.