NUP2201MR6 Datasheet | onsemi

Features : http://onsemi. - Low Capacitance (3 p F Maximum Between I/O Lines) - ESD Rating of Class 3B (Exceeding 8 k V) per Human Body model - and Class C (Exceeding 400 V) per Machine Model Protection for the Following IEC Standards: IEC 61000- 4- 2 (ESD) 15 k V (air) 8 k V (contact) IEC 61000- 4- 4 (EFT) 40 A (5/50 ns) IEC 61000- 4- 5 (lightning) 23 A (8/20 ms) UL Flammability Rating of 94 V- 0 TSOP- 6 LOW CAPACITANCE DIODE TVS ARRAY 500 WATTS PEAK POWER 6 VOLTS PIN CONFIGURATION AND SCHEMATIC I/O 1 VN 2 N/C 3 6 I/O 5 VP 4 N/C - - - - - - Typical Applications: High Speed munication Line Protection USB 1.1 and 2.0 Power and Data Line Protection Digital Video Interface (DVI) Monitors and Flat Panel Displays Pb- Free Package is Available .. 1 TSOP- 6 CASE 318G PLASTIC MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Peak Power Dissipation 8 x 20 m S @ TA = 25°C (Note 1) Operating Junction Temperature Range Storage Temperature Range Lead Solder Temperature - Maximum (10 Seconds) Human Body Model (HBM) Machine Model (MM) IEC 61000- 4- 2 Air (ESD) IEC 61000- 4- 2 Contact (ESD) Symbol Ppk TJ Tstg TL ESD Value 500 - 40 to +125 - 55 to +150 235 16000 400 20000 20000 Unit W MARKING DIAGRAM °C °C °C V 1 62 = Specific Device Code M = Date Code G = Pb- Free Package (Note: Microdot may be in either location) 6 62 MG G Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Non- repetitive current pulse per Figure 1 (Pin 5 to Pin 2) ORDERING INFORMATION Device NUP2201MR6T1 Package TSOP- 6 Shipping† 3000/Tape & Reel 3000/Tape & Reel NUP2201MR6T1G TSOP- 6 (Pb- Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging...