QSD2030
QSD2030 is Plastic Silicon Photodiode manufactured by onsemi.
Features
- PIN Photodiode
- Package Type: T- 1 3/4 (5 mm Lens Diameter)
- Wide Reception Angle, 40°
- Package Material and Color: Clear Epoxy
- High Sensitivity
- Peak Sensitivity l = 880 nm
- Radiant Sensitive Area: 1.245 mm x 1.245 mm
- This is a Pb- Free Device
ANODE
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Symbol
Parameter
Value
Unit
TOPR TSTG TSOL- I
Operating Temperature
Storage Temperature
Soldering Temperature (Iron) (Note 2), (Note 3), (Note 4)
- 40 to +100
°C
- 40 to +100
°C
240 for 5 s
°C
TSOL- F Soldering Temperature (Flow) (Note 2), (Note 3)
260 for 10 s
°C
VBR Reverse Breakdown Voltage
Power Dissipation (Note 1)
150 m W
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Derate power dissipation linearly 1.33 m W/°C above 25°C. 2. RMA flux is remended. 3. Methanol or Isopropyl alcohols are remended as cleaning agents. 4. Soldering iron tip 1/16” (1.6 mm) minimum from housing.
T- 1 3/4, 5MM PHOTODIODE CASE 100CF
ORDERING INFORMATION
Device
Package
Shipping
T- 1 3/4, 5MM...
