SKT672-070-E Overview
EN7307B STK672-070-E Thick-Film Hybrid IC Unipolar Constant-current Chopper (external excitation PWM) Circuit with Built-in Microstepping Controller Stepping Motor Driver (sine wave drive) Output Current 1.5A (no heat sink ) http://onsemi. Overview The STK672-070-E is a stepping motor driver hybrid IC that uses power MOSFETs in the output stage. It includes a built-in microstepping controller and is based on a...
SKT672-070-E Key Features
- Can implement stepping motor drive systems simply by providing a DC power supply and a clock pulse generator
- One of five drive types can be selected with the drive mode settings (M1, M2, and M3)
- Phase retention even if excitation is switched
- Provides the MOI phase origin monitor pin
- The CLK input counter block can be selected to be one of the following by the high/low setting of the M3 input pin. 1) R
- The CLK input pin includes built-in malfunction prevention circuits for external pulse noise
- ENABLE and RESET pins provided. These are Schmitt trigger inputs with built-in 20kΩ (typical) pull-up resistors
- No noise generation due to the difference between the A and B phase time constants during motor hold since external exci
- Microstepping operation supported even for small motor currents, since the reference voltage Vref can be set to any valu
- External excitation PWM drive allows a wide operating supply voltage range (VCC1 = 10 to 45V) to be used