Datasheet4U Logo Datasheet4U.com

SN74LS368A - 3-State Hex Buffer

Download the SN74LS368A datasheet PDF. This datasheet also covers the SN74LS365A variant, as both devices belong to the same 3-state hex buffer family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SN74LS365A_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LS368A 3-STATE HEX BUFFERS Motorola
SN74LS368A Hex Bus Driver Texas Instruments
SN74LS365A 3-STATE HEX BUFFERS Motorola
SN74LS365A Hex Bus Driver Texas Instruments
SN74LS366A 3-STATE HEX BUFFERS Motorola

Other Datasheets by onsemi

Part Number Description
SN74LS365A 3-State Hex Buffer
SN74LS367A 3-State Hex Buffer
SN74LS32 Quad 2-Input OR Gate
SN74LS377 Octal D Flip-Flop
SN74LS38 Quad 2-input NAND Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN74LS365A, SN74LS367A, SN74LS368A 3−State Hex Buffers These devices are high speed hex buffers with 3-state outputs. They are organized as single 6-bit or 2-bit/4-bit, with inverting or non-inverting data (D) paths. The outputs are designed to drive 15 TTL Unit Loads or 60 Low Power Schottky loads when the Enable (E) is LOW. When the Output Enable (E) is HIGH, the outputs are forced to a high impedance “off” state. If the outputs of the 3-state devices are tied together, all but one device must be in the high impedance state to avoid high currents that would exceed the maximum ratings. Designers should ensure that Output Enable signals to 3-state devices whose outputs are tied together are designed so there is no overlap.