STK672-640AN-E
Key Features
- Built-in overcurrent detection function, overheat detection function (output current OFF)
- FAULT signal (active low) is output when overcurrent or overheat is detected
- Built-in power on reset function. The motor speed is controlled by the frequency of an external clock signal
- 2 phase or 1-2 phase excitation switching function
- Phase is maintained even when the excitation mode is switched
- Rotational direction switching function
- Supports schmitt input for 2.5V high level input
- Incorporating a current detection resistor (0.089Ω: resistor tolerance 2%), motor current can be set using two external resistors
- The ENABLE pin can be used to cut output current while maintaining the excitation mode
