NCN6010 - SIM Card Supply and Level Shifter

Product Overview

NCN6010 SIM Card Supply and Level Shifter by ON - Datasheet Preview — Datasheet preview – NCN6010

Datasheet Details

Part number	NCN6010
Manufacturer	ON
File Size	295.73 KB
Description	SIM Card Supply and Level Shifter
Datasheet	NCN6010 Datasheet
Additional preview pages of the NCN6010 datasheet.

Product details

Description

Pin Name 1 VDD Type POWER 2 STOP 3 MOD_VCC INPUT INPUT 4 PWR_ON INPUT 5 I/O INPUT 6 CLOCK 7 RESET 8 SIM_RST 9 SIM_CLK INPUT INPUT OUTPUT OUTPUT 10 GND 11 SIM_I/O 12 Cta 13 Ctb 14 SIM_VCC GROUND POWER POWER POWER Description This pin is connected to the system controller power supply suitable to operate from a 3.6 V typical battery.A low ESR ceramic capacitor (4.7 mF typical) shall be used to bypass the power supply voltage.A Low level on this pin resets th

Features

ăSupports 3.0 V or 5.0 V Operating SIM Card.
ăBuilt-in Pull Up Resistor for I/O Pin in Both Directions.
ăAll Pins are Fully ESD Protected, According to GSM Specification.
ăSupports 10 MHz Clock.
ă6.0 kV ESD Proof on SIM Card Pins.
ăThese are Pb-Free Devices.
Typical.

📁 Similar Datasheet

NCN6000 - Compact Smart-Card Interface (ON Semiconductor)
NCN6001 - Compact Smart Card Interface (onsemi)
NCN6004A - Dual SAM/SIM Interface IC (onsemi)
NCN6024 - Compact and Low Cost Smart Card Interface IC (ON Semiconductor)
NCN6804 - Dual Smart-Card Interface (ON Semiconductor)
NCN1154 - DP3T USB 2.0 High Speed / Audio Switch (ON Semiconductor)
NCN1188 - 3:1 High Speed USB Switch (ON Semiconductor)
NCN2411 - 4-Channel Differential 1:2 Mux/Demux Switch (ON Semiconductor)

Other Datasheets by ON

Published: May 12, 2005 |