Datasheet Details
| Part number | NCP1086 |
|---|---|
| Manufacturer | ON |
| File Size | 184.10 KB |
| Description | 1.5A Adjustable and 3.3V Fixed Output Linear Regulator |
| Datasheet | NCP1086_ONSemiconductor.pdf |
|
|
Overview: NCP1086 1.5 A Adjustable and 3.3 V Fixed Output Linear Regulator The NCP1086 linear regulator provides 1.5 A at 3.3 V or adjustable output voltage. The adjustable output voltage device uses two external resistors to set the output voltage within a 1.25 V to 5.5 V range. The regulators is intended for use as post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages less than 1.4 V at 1.5 A output current. Device protection includes overcurrent and thermal shutdown. This device is pin patible with LT1086 family of linear regulators and has lower dropout voltage. The regulators are available in TO−220−3, surface mount D2PAK−3, and SOT−223 packages.
| Part number | NCP1086 |
|---|---|
| Manufacturer | ON |
| File Size | 184.10 KB |
| Description | 1.5A Adjustable and 3.3V Fixed Output Linear Regulator |
| Datasheet | NCP1086_ONSemiconductor.pdf |
|
|
|
| Part Number | Description |
|---|---|
| NCP1030 | Integrated DC-DC Converter |
| NCP1031 | Integrated DC-DC Converter |
| NCP1212 | Current Mode PWM Controller |
| NCP1215 | Low Cost Variable OFF Time Switched Mode Power Supply Controller |
| NCP1216 | PWM Current-Mode Controller |
| NCP1225 | Low Standby Power SMPS Controller |
| NCP1232 | Microprocessor Monitor |
| NCP1280 | Active Clamp Voltage Mode PWM Controller |
| NCP1410 | 250 mA Sync-Rect PFM Step-Up DC-DC Converter |
| NCP1411 | Sync-Rect PFM Step-Up DC-DC Converter |