NCP304 Datasheet | onsemi

Voltage Detector Series NCP304, NCP305 The NCP304 and NCP305 series are second generation ultra- low current voltage detectors. These devices are specifically designed for use as reset controllers in portable microprocessor based systems where extended battery life is paramount. Each series Features a highly accurate undervoltage detector with hysteresis which prevents erratic system reset operation as the parator threshold is crossed. The NCP304 series consists of plementary output devices that are available with either an active high or active low reset output. The NCP305 series has an open drain N- Channel output with an active low reset output. The NCP304 and NCP305 device series are available in the SC- 82AB package with standard undervoltage thresholds. Additional thresholds that range from 0.9 V to 4.9 V in 100 m V steps can be manufactured. Features - Quiescent Current of 1.0 m A Typical - High Accuracy Undervoltage Threshold of 2.0% - Wide Operating Voltage Range of 0.8 V to 10 V - plementary or Open Drain Reset Output - Active Low or Active High Reset Output - NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - These Devices are Pb- Free and are Ro HS pliant Typical Applications - Microprocessor Reset Controller - Low Battery Detection - Power Fail Indicator - Battery Backup Detection .onsemi. 1 SC- 82AB SQ SUFFIX CASE 419C PIN CONNECTIONS AND MARKING DIAGRAM GND 4 3 N.C. XXX MG G Reset 1 2 Vin Output (Top...