OP1270 Datasheet | OPTEK Technologies

.. Axial Fiber Optic Isolator OP1270 Series Features : - - - - - Opaque plastic housings High noise immunity Visible Red LED with Phototranisitor Output 0.05” (1.27 mm) lead spacing Data Transfer through plastic fiber optic cable Description: Each OPI1270 consists of a visible Red LED and a Phototransistor sensor, which are housed in separate opaque molded plastic housings and coupled by plastic fiber optic cable. The heavy-duty opaque housing shields the optical signal from dust, making this series of devices ideal for dust contaminated environments. The OPI1270 series are designed for applications that require high voltage isolation between input and output. Depending on the length of the fiber optic cable, the emitter does not have to be optically in-line with the sensor. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: . Part LED Peak Lead Device Length - Requiring High Voltage isolation between input and output Number Wavelength Length - Electrical isolation in dirty environments 32mm (1.26”) OPI1270-032 0.45” - Industrial equipment 40mm (1.57”) 645 nm OPI1270-040 (11.4 mm) - Medical equipment 80mm (3.15”) OPI1270-080 - Office equipment Dash Number in mm 1 3 Data Shee Pin # 1 2 Anode Cathode Pin # 3 4 Transistor Emitter Collector Ro HS . OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 03/06 Page 1 of 2 OPTEK Technology Inc. - 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc. .optekinc. Data Sheet 4 U...