OPB980 Datasheet | OPTEK Technologies

eatures: - - - - - - Data rates to 250 k Baud 24” minimum 26 AWG wire leads Choice of output configuration Choice of opaque or IR-transmissive shell material Choice of aperture Choice of mounting configuration Product Photo Here P Description: The OPB960, OPB970, OPB980 and OPB990 series of Photologic® photo integrated circuit switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.125” (3.180 mm) wide slot, a user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting configurations. OPB960 through OPB973 have 0.425” (10.795 mm) PCBoard leads with 0.320” (8.1 mm) spacing. OPB980 through OPB993 have 24” (609 mm) 26 AWG wires. All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be specified as buffered or inverted with Totem-Pole or Open Collector output. Devices are also TTI/LSTTL patible and can drive up to 10 TTL loads. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: - Mechanical switch replacement - Speed and direction indication - Mechanical limit indication - Rotary encoders - Edge sensing - Sliding Door Automotive and Liftgate applications Part Number Guide - OPB980 and OPB990 Series OPB 9 X X X X X Z OPTEK Assembly Photologic™ Pnoto Integrated Circuit Sensor Family Discrete Housing Material: 6 - Base mount IR transmissive plastic discrete shell with PCBoard lead termination 7 - Base mount opaque plastic discrete shell with PCBoar lead termination 8 - Base mount IR transmissive plastic discrete shell with wire termination 9 - Base mount opaque plastic discrete shell with wire termination Electrical Specifications: 0 - Buffered Totem-Pole Output 1 - Buffered Open-Collector Output 2 - Inverted Totem-Pole Output 3 - Inverted Open-Collector Output All PCBoard Versions Ro HS pliant: Z = Wire Version Ro HS...