OPF1412 Datasheet | OPTEK Technologies

Features : - Low cost - High speed - No mounting hardware required - Wide temperature range - 100% LED burn-in (96 hours) - SMA or ST style ports - Wave solderable Product Photo Here T-Package Description : The OPF1412 and OPF1414 series fiber optic transmitters contain a high speed 840 nm Ga AIAs LED. This LED in conjunction with the package lensing is designed to efficiently couple light into multimode optical fibers ranging in size from 50/125 µm up to 200/230 µm. The high coupling efficiency of the LED and lensing allows the devices to be used at low current drive levels thus decreasing the power consumption and increasing system reliability. The consistency of coupling varies by less than 5 d B from part to part which reduces the dynamic range requirements of the receiver. The high power (-16.0 d Bm into 50/125 µm) OPF1414 was designed for small fiber applications or where there are large fixed losses such as in systems that contain star couplers or in line connectors. The OPF1412 (-12.0 d Bm optical power) is ideal for 100/140 µm fiber applications. For custom electrical and optical requirements contact your local representative or OPTEK for more information. OPF1412 OPF1414 OPF1412T OPF1414T Pin # Description Pin # Description 1 No Connection 8 No Connection Anode Anode Cathode Anode 4 No Connection 5 No Connection Part Number OPF1412 OPF1412T OPF1414 OPF1414T Typ. d Bm into 50/125µm @ 60m A -16.0 -16.0 -12.0 -12.0 Typ. d Bm into 100/140µm @ 60m A -12.0 -12.0 -6.5 -6.5 Ro HS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. - 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc....